Ratio & volume control
Select around material ratio, target volume, flow and accuracy.
Meter-Mix Systems
Meter-Mix Systems
Graco meter-mix systems are designed for accurate on-ratio processing of two-component materials such as epoxies, silicones, urethanes and other sealants/adhesives. System selection depends on ratio, viscosity, flow rate, shot/bead requirement and production integration.
Simplinity capability
Metering and mixing systems for controlled multi-component application.
Two-component metering, mixing and dispensing for adhesives and sealants.
Material compatibility
Account for viscosity, fillers, abrasiveness, cure behavior and temperature requirements.
Application integration
Configure for bonding, sealing, potting, gasketing, encapsulation or automated dispense processes.
Application context
See the technology in the process.
These examples show how Meter-Mix Systems connects to a real process. Final selection depends on the specific material, operating environment, production target and application method.
Meter and mix hardware
Ratio, flow and material behaviour define the metering architecture.
Application point
Bead geometry, shot size and cycle drive the dispense configuration.
Process integration
Automation, motion and verification complete the system discussion.
Selection guide
Before configuring a meter-mix system.
A meter-mix configuration is defined by chemistry, ratio, viscosity, output, accuracy and the way the dispense process connects to production.
Material
1K/2K chemistry, mix ratio, viscosity and conditioning requirement.
Dose
Shot size or bead rate, accuracy, repeatability and flow range.
Application
Bead, dot, potting or filling geometry and dispense location.
Production
Cycle time, automation level, monitoring and integration requirement.
Application guide notes
Go deeper on the process.
Use these notes to move from this page into the detailed application questions behind Meter, Mix & Dispense.
Product selection support
Start with the materials, ratio and dispense requirement.
Share the two-component material, mix ratio, viscosity, flow/shot requirement, dispense geometry and cycle target.
Hours
Monday to Friday · 9:00 AM–6:00 PM
WhatsApp+91 99608 20347